3-Ply Yellow Shuttering Panel

3-Ply Yellow Shuttering Panel
Product Introduction:
3-ply yellow shuttering panel – also called triply formwork panel or yellow three-layer shuttering plywood – is a solid wood panel used in concrete formwork. The name comes from its three-layer cross-laminated build: a spruce core with pine face veneers, bonded with waterproof adhesive.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 3-ply yellow shuttering panel in China. If you're going to wholesale bulk classy 3-ply yellow shuttering panel, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

3-ply yellow shuttering panel – also called triply formwork panel or yellow three-layer shuttering plywood – is a solid wood panel used in concrete formwork. The name comes from its three-layer cross-laminated build: a spruce core with pine face veneers, bonded with waterproof adhesive. Both faces are coated with a weather-resistant melamine or phenolic finish, which gives the panel its characteristic yellow colour.

The 9+9+9mm layer construction gives the panel consistent mechanical properties even when cut, making it adaptable to different formwork layouts. These panels come without steel frames – they are solid wood panels designed to work with timber beam support systems.

 

Key Benefits

 

Three-ply cross-laminated construction. The panel is made from three wood layers – typically a spruce core with pine faces – laminated with alternating grain directions. This construction gives good dimensional stability and load capacity while reducing warping, cracking, and deformation. The outer plies that contact concrete are thicker (9mm), which improves durability and extends service life.

Melamine or phenolic resin coating. The yellow surface is a heat-pressed melamine resin or phenolic film coating. It is weather-resistant and moisture-resistant, protecting the panel from water absorption and swelling in wet construction conditions.

Easy stripping. The smooth coated surface stops concrete from bonding to the panel. This makes formwork removal quicker and cuts down on labour after concrete cures.

Lightweight and easy to work with. The solid wood construction makes these panels lighter than steel formwork. You can cut, saw, drill, and nail them with standard woodworking tools.

Reusable. With proper handling and maintenance, these panels can be reused multiple times – typically 3 to 8 uses under normal conditions, with higher-grade versions achieving 10 or more cycles.

 

Product Specifications

Product Type 3-ply shuttering plywood / triply formwork panel
Core Material Spruce, pine, fir, or radiata pine
Face Material Selected pine timber
Surface Finish Melamine resin coating or phenolic film
Surface Colour Yellow (standard); natural finish also available
Construction Cross-laminated three-ply structure – 9+9+9mm layers
Adhesive Phenolic WBP glue, MUF glue (E0 or E1 grade)
Thickness Options 21mm, 27mm (30mm available for heavy-duty applications)
Standard Widths 500mm, 1000mm
Standard Lengths 1970mm, 2000mm, 2500mm, 3000mm
Density 480–530 kg/m³ (varies by core species)
Moisture Content 8% – 14% at time of shipment
Edge Treatment Raw or polyurethane edge sealing (optional)
Formaldehyde Emission E0 or E1 grade available

 

Technical Data

 

3-Ply Yellow Shuttering Panel – General Configuration

Item

Specification

Product Type

3-Ply Shuttering Plywood

Core

Spruce / Pine / Fir / Radiata Pine

Face

Selected Pine Timber

Surface

Melamine Resin Coating / Phenolic Film

Construction

Cross-Laminated 3-Ply (9+9+9mm)

Thickness

21mm, 27mm (30mm available)

Width

500mm, 1000mm

Length

1970mm, 2000mm, 2500mm, 3000mm

Density

480–530 kg/m³

Moisture Content

8% – 14%

Glue Type

Phenolic WBP / MUF (E0/E1)

Reuse Cycles

3–8 times (standard); 10+ times (higher grade)

Main Applications

Concrete formwork, slab formwork, wall formwork, beam formwork, column formwork

 

Weight Reference

Thickness

Approx. Weight

21mm

~10 kg/m²

27mm

~12.3 kg/m²

Because this is a solid wood product without steel frames, its mechanical properties stay consistent even if you cut the panel on site. Cut edges must be sealed to prevent water from getting in.

 

Application Scope

 

3-ply yellow shuttering panels are used in concrete formwork where a lightweight, workable panel is needed:

  • Concrete slab formwork
  • Wall formwork systems
  • Beam formwork
  • Column formwork
  • Building foundations
  • Small wall and column casting
  • Site safety fencing
  • Temporary work benches
  • Industrial equipment protective panels

These panels suit residential, commercial, and infrastructure projects. They work with timber beam support systems such as H20 beams, and are compatible with standard formwork accessories – tie rods, walers, and support props.

Note: 3-ply shuttering panels are not recommended for large-span or high-wall concrete pours where bulging is a risk. For heavy-duty or high-load work, thicker panels or steel-frame formwork systems are a better choice.

 

System Components

 

When used as part of a formwork system, 3-ply yellow shuttering panels are typically combined with:

Panel System:

  • 3-ply yellow shuttering panels – the surface that contacts concrete
  • Timber beams (e.g., H20 beams) – vertical or horizontal support
  • Steel walers – horizontal reinforcement for larger wall sections

Support System:

  • Adjustable steel props – vertical support
  • Base jacks – levelling on uneven ground
  • Pull-push props – plumb adjustment and stability

Fixing System:

  • Nails and screws – standard fasteners work with the timber panel
  • Formwork ties and clamps – panel-to-panel connections
  • Wedge pins – secure connections

Protective Details:

  • Edge sealing – waterproof paint or polyurethane on cut edges to stop moisture getting in
  • Release agent – recommended for first use and critical finish applications

 

Services

 

  • Design Consultation: Panel thickness and dimensions can be reviewed according to support spacing and expected loading
  • Custom Fabrication: Sheet size, thickness, and edge treatment can be produced to order
  • Cutting to size: Panels can be cut to specified dimensions
  • Edge sealing: Waterproof treatment can be applied to cut edges
  • Sample Service: Samples can be supplied for inspection of thickness, surface quality, and workmanship
  • Project Supply: Panels may be supplied in full sheets or cut to agreed dimensions with specified packing

 

FAQ

 

Q: What does "3-ply" mean?

A: It refers to the three-layer construction – two outer face veneers with a core layer in between, cross-laminated for strength and stability. The typical build is 9+9+9mm, giving a total thickness of 27mm.

Q: How does 3-ply shuttering plywood differ from film faced plywood?

A: 3-ply shuttering plywood is a solid wood panel with a melamine resin coating, usually used for lighter formwork work. Film faced plywood has a phenolic film overlay that gives many more reuses (50+ cycles vs 3-10 for 3-ply). Film faced is better for high-reuse, heavy-duty jobs.

Q: How many times can 3-ply yellow shuttering panels be reused?

A: Under normal use with proper handling, 3 to 8 times. Better-grade panels with a higher quality coating can achieve 10 or more cycles. Good cleaning, edge sealing, and storage will extend the life.

Q: Can 3-ply shuttering panels be used in wet conditions?

A: Yes. The melamine resin or phenolic coating gives moisture resistance, and WBP glue is waterproof. But cut edges need sealing to stop water getting in. These panels suit outdoor wet construction sites.

Q: What thickness should I choose?

A: 21mm works for light-duty formwork. 27mm is the most common for general formwork. 30mm is for heavier structural casting. The choice depends on span, support spacing, and the load you expect.

Q: Can 3-ply shuttering panels be cut on site?

A: Yes. Standard woodworking tools can cut, saw, and drill them. Cut edges must be sealed with waterproof paint or edge sealer to stop moisture penetration.

Q: Why are the panels yellow?

A: The yellow finish is the standard melamine surface treatment. It hides minor wood defects and gives a uniform look. The bright colour also makes panels easier to spot on busy sites.

Q: How should 3-ply shuttering panels be stored?

A: Store flat, off the ground, in a dry place. Cover stacks to keep rain off. Avoid long periods in direct sunlight. Seal cut edges straight after cutting. Clean panels after each use before storing.

Q: How much does a typical panel weigh?

A: A 21mm panel weighs about 10kg per square metre. A 27mm panel weighs about 12.3kg per square metre.

Q: Can 3-ply shuttering panels be used for large-span, high-wall concrete pours?

A: These panels are not recommended for large-span or high-wall pours because of the risk of bulging. For those jobs, thicker panels, steel-frame formwork, or film faced plywood with higher load capacity is a better choice.

 

Hot Tags: 3-ply yellow shuttering panel, China 3-ply yellow shuttering panel manufacturers, suppliers factory, 3 Ply Yellow Shuttering Panel, Anti Slip Film Faced Plywood, Film Faced Plywood, formwork, PP Film Faced Plywood, wood plywood formwork

Send Inquiry