78 ABS Plastic Formwork

78 ABS Plastic Formwork
Product Introduction:
78 ABS plastic formwork is a concrete forming system manufactured from high-performance ABS (Acrylonitrile Butadiene Styrene) thermoplastic material. The "78" refers to the panel thickness of 78mm, providing the rigidity required for wall, column, slab, and beam applications.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 78 abs plastic formwork in China. If you're going to wholesale bulk classy 78 abs plastic formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

78 ABS Plastic Formwork 12

78 ABS plastic formwork is a concrete forming system manufactured from high-performance ABS (Acrylonitrile Butadiene Styrene) thermoplastic material. The "78" refers to the panel thickness of 78mm, providing the rigidity required for wall, column, slab, and beam applications.

The system consists of standard panels, corner formwork, connecting handles, steel walers, tie rods, and adjustable support props. Panels are produced through injection moulding, delivering consistent dimensional accuracy and a smooth surface finish. The material itself offers high mechanical strength, good impact resistance, and excellent dimensional stability.

light enough for a single worker to handle without mechanical assistance. Modular design allows even unskilled workers to assemble walls, columns, and slabs quickly and effectively. With proper handling, 78 ABS plastic formwork panels can be reused 100 to 150 times, delivering significant cost savings over the life of a project.

 

Advantages

 

High strength and durability. ABS material offers high mechanical strength, impact resistance, and abrasion resistance. Compared to regular plastics, ABS provides superior stiffness and lower deformation under load. It maintains stable performance across a wide temperature range and is resistant to chemicals and weather conditions.

Lightweight and easy to handle. At approximately 14-15kg per square metre, the panels are significantly lighter than steel formwork. one person can carry and position it without crane assistance. This saves crane time, reduces labour requirements, and speeds up construction.

Excellent concrete finish quality. The smooth, non-porous panel surface produces high-quality concrete finishes with minimal surface defects. The non-water-absorption surface ensures concrete does not stick, often eliminating the need for plastering.

No release agent required. The specially treated surface prevents concrete adhesion. Panels can be cleaned simply with water after each use – no release oil, no chemicals, no extra cost.

Weather-resistant and waterproof. ABS material is imputrescible and rustless, making it especially suitable for underground and watery circumstances where timber would rot and steel would rust. The panels are resistant to corrosion from seashore, moist areas, and even chemicals.

High reusability and cost-effectiveness. Panels can be reused 100 to 150 times, compared to plywood which can only be reused 3 to 5 times. This high reusability makes ABS plastic formwork significantly more cost-effective than timber over the life of a project.

Eco-friendly and recyclable. At the end of its service life, the panels are 100% recyclable. Waste scrap moulding boards can be recycled, contributing to reduced carbon emissions and conservation of natural resources.

78 ABS Plastic Formwork 13

 

Features

Material ABS (Acrylonitrile Butadiene Styrene) thermoplastic
Panel thickness 78mm
Density 1.03 – 1.28 g/cm³
Surface Smooth, non-porous, non-stick
Reusability 80-100+ cycles (typical)
Load capacity 60 kN/m²
Maximum slab thickness up to 250mm
Water absorption None
Colour Black (standard)
Modular design Universal forming application with just a few panel sizes
Compatible with Steel walers, tie rods, support props, scaffold systems

 

Specifications

 

Size mm

Unit Weigh kg/pcs

Area m²/pcs

1500*1200*78

27.00

1.8000

1500*1000*78

22.50

1.5000

1500*900*78

20.25

1.3500

1500*800*78

18.00

1.2000

1500*700*78

15.75

1.0500

1500*600*78

13.50

0.9000

1500*500*78

11.25

0.7500

1500*450*78

10.13

0.6750

1500*400*78

9.00

0.6000

1500*350*78

7.88

0.5250

750*150*78

2.25

0.1125

750*100*78

1.50

0.0750

600*600*78

6.84

0.3600

600*500*78

5.70

0.3000

500*500*78

4.75

0.2500

500*400*78

3.80

0.2000

400*400*78

3.04

0.1600

300*300*78

1.71

0.0900

250*250*78

1.19

0.0625

200*200*78

0.76

0.0400

150*150*78

0.43

0.0225

Custom sizes available on request.

 

Application Scope

 

78 ABS Plastic Formwork 14

78 ABS plastic formwork is suitable for a wide range of cast-in-place concrete construction applications, including:

► Wall construction – residential, commercial, and industrial shear walls

► Column formwork – square, rectangular, and round columns (300mm, 350mm, 400mm, 450mm diameter)

► Slab and deck formwork – floor slabs, roof slabs, and bridge decks

► Beam formwork – various beam depths and widths

► Basement and underground structures – waterproof and rustless, suitable for wet conditions

► Infrastructure projects – tunnels, canals, culverts, and swimming pools

► Residential and commercial buildings – apartments, villas, office buildings, shopping malls, foundations, elevator shafts

The system works well on projects with repetitive layouts – the more uses you get from the panels, the better the economics. Its lightweight nature also makes it a good choice for sites with limited crane access or where manual handling is preferred.

 

System Components

A complete 78 ABS plastic formwork system consists of the following components:

Formwork Panels:

► Standard panels – 78mm thick, 1,200mm × 600mm, injection-moulded ABS

► Corner formwork – internal and external corner sections

► Small panels – various sizes for fine adjustment and infill

Reinforcement Components:

► Steel walers – horizontal reinforcement for larger wall sections

► Tie rods – threaded rods for panel tensioning

► Plate nuts – for securing tie rods

Connection Components:

► Connecting handles – universal handles for easy assembly, even by unskilled workers

► Connecting pins – secure panel-to-panel and panel-to-corner connections

Support Components:

► Adjustable steel props – vertical support during erection

► Base jacks – levelling on uneven ground

► Pull-push props – alignment and stabilisation

Optional components available for custom configurations.

 

Competitive Advantages

Cost advantage

The material cost of ABS plastic formwork is substantially lower than aluminium formwork. With 100 to 150 times reuse cycles, the per-use cost is significantly lower than plywood (which typically lasts only 3-5 uses) or steel formwork. Total project cost savings can be substantial, particularly for projects with multiple floor repetitions.

Manufacturing capability

We manufacture 78 ABS plastic formwork in our own facility. Panels are produced through a controlled injection moulding process, ensuring consistent quality across all batches. ABS material offers high mechanical strength, excellent dimensional stability, and superior processability.

Quality assurance

Each panel is inspected for dimensional accuracy, surface finish, and structural integrity before dispatch. The smooth, non-porous surface ensures excellent concrete finish quality and easy cleaning.

Practical design

The 78mm panel thickness provides the rigidity needed for wall, column, and slab applications while maintaining a manageable panel weight of 9.7kg. The modular design with universal handles allows even unskilled workers to assemble the system quickly and effectively.

Environmental responsibility

ABS plastic is 100% recyclable. Waste scrap moulding boards can be recycled. The product supports green building standards and contributes to reduced carbon emissions and conservation of natural resources.

Export experience

With extensive experience in international markets, we provide full documentation – material test reports, third-party inspection certificates, and customs clearance paperwork – ensuring smooth delivery for overseas orders.

 

Services

 

78 ABS Plastic Formwork 19

► Design consultation: free formwork layout and panel configuration recommendations based on your architectural and structural drawings

► Custom fabrication: non-standard panel sizes, special configurations, and custom dimensions – available on request

► Technical support: video consultation within 24 hours; on-site support for large or complex projects

► Delivery: standard panels in 5-10 working days (subject to stock); custom orders in 15-20 working days

► Samples: available for testing – freight to be covered by the buyer

 

FAQ

 

Q: How many times can 78 ABS plastic formwork panels be reused?

A: With proper handling and maintenance, the panels can be reused 100 to 150 times. Some formulations have been documented achieving higher cycles under careful use. This high reusability is one of the key factors that makes ABS plastic formwork more cost-effective than timber over the life of a project.

Q: Do I need to use release agent with ABS plastic formwork?

A: No. The panels have a non-porous, specially treated surface that prevents concrete from adhering. They can be cleaned simply with water after each use – no release oil, no chemicals, no extra cost.

Q: Can 78 ABS plastic formwork be cut, nailed, or drilled on site?

A: Yes. ABS material can be sawn, drilled, and worked using standard tools. This makes it compatible with other materials such as wood, steel, and aluminium.

Q: What is the load capacity of 78 ABS plastic formwork?

A: The system is designed for a safe working load of 60 kN/m². The maximum slab thickness can reach up to 250mm in 50mm increments with proper shoring components.

Q: Is ABS plastic formwork waterproof?

A: Yes. The panels are 100% waterproof and weather-resistant. They are imputrescible and rustless, making them especially suitable for underground and watery circumstances. The material is also resistant to corrosion from seashore, moist areas, and chemicals.

Q: How do I clean the panels after use?

A: The panels can be cleaned simply with water. No special cleaning agents or release oil are required. The non-porous surface prevents concrete from sticking, making cleaning quick and easy.

Q: Is ABS plastic formwork suitable for harsh environments?

A: Yes. The panels can work in hot and cold areas, proven by laboratory tests and worldwide tough site environments. ABS offers excellent chemical and weather resistance, making it ideal for outdoor use.

Q: Can I get samples before placing an order?

A: Yes – we offer samples for testing. Freight is to be covered by the buyer. Each sample is marked with the panel specifications for verification upon receipt.

 

Hot Tags: 78 abs plastic formwork, China 78 abs plastic formwork manufacturers, suppliers factory, 65 PP Plastic Formwork, 75 ABS Plastic Formwork, 78 ABS Plastic Formwork, 78 PP Plastic Formwork, plastic formwork, WPC Solid Plastic Formwork

Send Inquiry