Anti-Slip Film Faced Plywood

Anti-Slip Film Faced Plywood
Product Introduction:
Anti-slip film faced plywood is a plywood panel with a textured surface. It is used when you need more than just a flat cover – the surface has to give workers, tools, or equipment a secure footing, especially when the platform is wet, muddy, or dusty.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of anti-slip film faced plywood in China. If you're going to wholesale bulk classy anti-slip film faced plywood, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

Anti-slip film faced plywood is a plywood panel with a textured surface. It is used when you need more than just a flat cover – the surface has to give workers, tools, or equipment a secure footing, especially when the platform is wet, muddy, or dusty.

The panel is made by bonding several layers of veneer together and applying a protective film to the surface. On the anti-slip side, the film is pressed with a raised pattern – wire-mesh, hexagonal, or other textured designs.

This material is commonly found on scaffolding platforms, temporary work decks, walkways, industrial flooring, and truck beds. It can also be used in some formwork jobs, but you have to remember that the textured face will leave a pattern on the concrete.

The core can be hardwood, birch, poplar, or mixed veneer. The core material, the adhesive, the film, and the edge treatment – all these have to be considered together, especially if the panel will be exposed to moisture or used over and over.

 

Key Benefits

Better Grip

The raised pattern gives you a surface that is less slippery than a smooth panel. This matters when the platform gets wet or dusty.

Holds Up to Repeated Use

These panels get moved around, taken down, and put back up. The film coating protects the plywood from wear during handling.

Stays Flat

Cross-laminated veneer construction means the panel is more stable than solid timber. It resists splitting and warping.

Works in Different Places

The same panel can be used for access decks, temporary floors, truck beds, and industrial work areas – as long as the thickness and grade match the load.

Easy to Clean

The coated surface does not soak up concrete residue, dust, or dirt like untreated timber. Most site debris can be washed or brushed off.

Choose What You Need

Core material, thickness, film type, surface pattern, and edge treatment can all be selected based on the job.

 

Product Specifications

Product Type Anti-slip film faced plywood
Core Material Hardwood, birch, poplar, or mixed veneer
Surface Textured anti-slip film
Back Surface Smooth film or specified finish
Film Phenolic or equivalent protective film
Panel Construction Cross-laminated veneer layers
Adhesive Waterproof or moisture-resistant adhesive, depending on grade
Edge Treatment Sealed or unsealed, according to requirement
Thickness Multiple options available
Panel Size Standard and project-specific dimensions
Surface Pattern Wire mesh, hexagonal, or other textured patterns
Applications Scaffolding decks, temporary flooring, walkways, working platforms, vehicle floors, and selected formwork uses
Customisation Core material, thickness, dimensions, film, texture, and edge treatment

A good face film matters, but it is not the only thing that counts. Core quality, bonding, thickness, support spacing, and actual working load all affect performance.

 

Technical Data

 

Anti-Slip Film Faced Plywood – General Configuration

Item

Specification

Product Type

Anti-Slip Film Faced Plywood

Core

Hardwood / Birch / Poplar / Mixed Veneer

Face

Anti-Slip Textured Film

Back

Smooth Film / Specified Finish

Film Type

Phenolic / Wear-Resistant Film

Construction

Multi-Layer Cross-Laminated Veneer

Thickness

Multiple Options

Sheet Size

Standard / Customised

Edge Treatment

Sealed / Unsealed

Main Uses

Platform / Flooring / Walkway / Formwork

Customisation

Available

Different patterns can be supplied depending on the job. A heavier texture gives more grip; a finer texture may be easier to clean.

Panel thickness should be chosen based on the actual support spacing and load. A thicker panel does not fix a poorly designed frame or insufficient support.

 

Application Scope

 

Anti-slip film faced plywood is used where you need a durable surface with decent grip.

  • Scaffolding platforms – deck panels for work at height
  • Temporary working platforms – maintenance, installation, and inspection
  • Construction walkways – temporary pedestrian paths
  • Vehicle flooring – truck beds, trailers, cargo areas
  • Industrial flooring – workshops, warehouses, temporary work areas
  • Bridge and infrastructure work – temporary decks and access platforms
  • Concrete formwork – specific jobs where a textured finish is acceptable or required

The panel grade must match the support spacing, the environment, and the load you expect. Using a high-grade panel is pointless if the supporting structure is not up to the same standard.

 

System Components

 

When used as part of a platform or temporary floor system, anti-slip film faced plywood is typically combined with:

Panel System:

  • Anti-slip plywood – the main walking or working surface
  • Timber beams – support the plywood and transfer loads
  • Steel framing – the support grid under the panels
  • Edge members – support and finish exposed panel edges

Fixing System:

  • Screws or bolts – secure panels to the support structure
  • Clamps or brackets – used in some platform systems
  • Joint supports – provide support at panel joints

Protective Details:

  • Edge sealing – reduces moisture entry at cut edges
  • Protective treatment – applied to exposed areas as needed
  • Textured film surface – provides the anti-slip function

The support arrangement and panel selection must be considered together. Panel size, span, fixing method, and load all interact – you cannot look at them separately.

 

Services

 

Design Consultation

Panel thickness and dimensions can be reviewed according to support spacing and expected loading

01

Custom Fabrication

Sheet size, core material, thickness, film specification, surface texture, and edge treatment can be produced to order

02

Sample Service

Samples can be supplied for checking texture, thickness, film quality, and workmanship

03

Technical Support

Product data is available for customers comparing panel grades for scaffolding, flooring, or other uses

04

Project Supply

Panels may be supplied as full sheets or cut to agreed dimensions with specified packing

05

 

FAQ

 

Q: What is anti-slip film faced plywood?

A: It is plywood with a protective film that has a raised texture on the working side. The texture gives you better grip than a smooth panel.

Q: Where is it commonly used?

A: Scaffold decks, work platforms, walkways, temporary floors, vehicle floors, and some formwork.

Q: Can it be used outdoors?

A: Yes, if the plywood grade, adhesive, film, and edge treatment are right for the environment. Long-term water exposure still needs to be managed.

Q: What core options are available?

A: Hardwood, birch, poplar, and mixed-veneer cores are commonly available, depending on the supplier.

Q: Can the thickness be changed?

A: Yes. Thickness is chosen based on span, support spacing, and expected load.

Q: Can the surface pattern be specified?

A: Yes, where multiple textures are offered. It depends on how much grip you need.

Q: Can it be used for concrete formwork?

A: It can be used in some cases, but the textured face will affect the concrete finish. Smooth plywood is normally used when you want a smooth concrete surface.

Q: What should be done after use?

A: Clean off dust, concrete residue, and other debris, then store the sheets flat or in a properly supported stack. Pay attention to exposed cut edges.

 

Hot Tags: anti-slip film faced plywood, China anti-slip film faced plywood manufacturers, suppliers factory, 3 Ply Yellow Shuttering Panel, Anti Slip Film Faced Plywood, Film Faced Plywood, formwork, PP Film Faced Plywood, wood plywood formwork

Send Inquiry