117 Steel Frame Formwork

117 Steel Frame Formwork
Product Introduction:
117 steel frame formwork is a modular concrete forming system designed for walls, columns, slabs, beams, and other structural elements. The number 117 refers to the steel frame height – 117mm. In the steel frame product range, this sits between 100mm systems and 120mm heavy-duty options.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 117 steel frame formwork in China. If you're going to wholesale bulk classy 117 steel frame formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

86 1001

117 steel frame formwork is a modular concrete forming system designed for walls, columns, slabs, beams, and other structural elements. The number 117 refers to the steel frame height – 117mm. In the steel frame product range, this sits between 100mm systems and 120mm heavy-duty options.

The frames are welded steel with a 117mm profile depth, made from Q235 or Q355B steel. Panel faces are 15-18mm film-faced plywood. The 117mm frame delivers greater stiffness than 100mm systems while remaining lighter than 120mm options.

117 series occupies the middle ground – higher load capacity than standard systems, less weight than heavy-duty options. It suits projects where 100mm is insufficient but 120mm is more than needed.

 

Advantages

 

Stiffer than 100mm. The deeper frame handles taller walls, faster placement rates, and higher concrete pressures. Suitable for high-rise residential and commercial projects.

Lighter than 120mm. More capacity than 100mm, but weight stays below 120mm heavy-duty systems. Easier site handling, reduced crane time, lower labour costs.

Larger panel sizes. Deeper frames allow bigger panels – fewer panels per square metre means faster assembly, fewer joints, cleaner concrete finish.

Less deflection. Stiffer frames deflect less under load. The plywood face stays flatter, producing a smoother, more uniform concrete surface.

Multi-application. Handles walls, columns, slabs, beams, and other structural elements. Works with standard and custom configurations.

Replaceable face. When the plywood wears out, replace only the face. The steel frame remains in service.

86 2

 

Technical Data

Frame height 117mm
Frame material Q235 or Q355B steel
Frame section Hollow or solid
Panel face 15-18mm film-faced plywood
Panel thickness 117mm frame + plywood face
Panel weight approximately 50-60kg/m²
Panel widths 100–900mm
Panel heights 300–3000mm (300mm increments)
Load capacity 70-85 kN/m² (configuration dependent)
Frame service life 8-10 years
Panel reuse 50-80 times with normal care
Connection types Pins and wedges, or clamps
Finish Paint or hot-dip galvanised
Hole spacing 50mm modular

 

Specifications

 

Parameter

Specification

Frame Height

117mm

Frame Material

Q235 / Q355B steel

Frame Section

Hollow or solid

Panel Face

15-18mm film-faced plywood

Panel Weight

~50-60kg/m²

Width Range

100–900mm

Height Range

300–3000mm

Lateral Load

70-85 kN/m²

Frame Service Life

8-10 years

Panel Reuse

50-80 times

Connection

Pins/wedges or clamps

Finish

Painted / Galvanised

Hole Spacing

50mm modular

 

Application Scope

 

86 3

117 steel frame formwork handles medium-heavy concrete work:

► Walls – high-rise residential, commercial, industrial shear walls

► Columns – large square and rectangular sections

► Slabs – floor and roof

► Beams – various depths and widths

► Bridge piers and abutments

► Tunnels and underground structures

► Power plants and industrial facilities

► Large civil infrastructure

Choose this system when 100mm is insufficient but 120mm heavy-duty is more than required – a balanced solution for tall pours and higher concrete pressures.

 

System Components

A complete 117 steel frame formwork system includes:

Panels:

► Standard wall panels – various widths and heights

► Column panels – adjustable for different sizes

► Corner sections – internal and external

► Filler panels – for infill and adjustment

Connections:

► Pins and wedges – panel-to-panel connections

► Clamps – alternative option

► Flat ties – panel tensioning

100 Steel Frame Formwork 4001
100 Steel Frame Formwork 8

Reinforcement:

► Tie rods and nuts – through-wall tensioning

► Heavy-duty walers – horizontal bracing

► Corner braces – stability at corners

Supports:

► Adjustable steel props – vertical support

► Base jacks – levelling

► Pull-push props – plumb adjustment

 

Competitive Advantages

 

1

Balanced capacity. The 117mm frame delivers 70-85 kN/m² – stronger than 100mm, lighter than 120mm. A practical middle-ground choice for projects needing extra strength without the extra weight.

2

Long service life. Heavier steel section means frames last 8-10 years or more. Less maintenance, fewer replacements.

3

Fewer panels. Deeper frames allow larger panels – faster assembly, fewer joints, reduced leakage risk.

4

Improved finish. Extra stiffness keeps the panel face flat under load. You get a smoother, more even concrete surface.

5

Cost efficiency. 50-80 uses and 8-10 year frame life deliver competitive per-use cost, especially on projects where the capacity is required.

6

Proven design. Similar systems have been used on large civil projects for decades. Mature, reliable.

7

Versatile application. Works across a wide range – from standard walls to bridge piers to industrial structures.

 

Services

 

Design consultation

free layout planning and panel configuration from your drawings

01

Custom fabrication

non-standard sizes and special configurations available on request

02

Technical support

video consultation within 24 hours; on-site for complex projects

03

Delivery

standard panels in 20-30 working days; custom orders 25-35 working days

04

Samples

available for testing – freight to be covered by buyer

05

 

FAQ

 

Q: What does "117" refer to?

A: The steel frame height – 117mm. It sits between 100mm systems (lighter, less capacity) and 120mm heavy-duty systems (heavier, more capacity).

Q: How much load can it handle?

A: Typically 70-85 kN/m², depending on panel configuration and tie rod spacing. For comparison, 100mm systems handle 80-90 kN/m², while 120mm systems handle higher loads.

Q: What types of projects is this best for?

A: Projects where 100mm is not strong enough but 120mm is more than needed – a balanced solution for tall pours and higher concrete pressures.

Q: Can it be used for both walls and columns?

A: Yes. The system works for walls, columns, slabs, beams, and other structural elements.

Q: How many uses can I expect?

A: 50-80 times with normal site care. The steel frame itself can last 8-10 years. Replace the plywood face when it wears out.

Q: Is it heavier than 100mm systems?

A: Slightly – about 50-60kg/m² compared to 55-65kg/m² for 100mm. The 117mm frame provides more stiffness per kilogram of weight.

Q: What panel sizes are available?

A: Standard widths from 100mm to 900mm. Heights from 300mm to 3000mm in 300mm increments. Custom sizes available on request.

Q: How do panels connect?

A: Pins and wedges, or clamp systems – both options are available.

Q: Can I get custom panel sizes?

A: Yes – non-standard sizes and special configurations can be manufactured on request.

Q: What is the concrete finish quality?

A: The 117mm frame stiffness minimises deflection between tie rods – the plywood face stays flat, producing a smoother, more even concrete surface. Often suitable for bare concrete finishes.

Q: How does 117 compare to 100mm and 120mm?

A: It is the middle option – more capacity than 100mm, lighter than 120mm. A balanced choice for projects needing extra strength without the extra weight.

Q: Do I need special tools for assembly?

A: No. Assembly uses standard pins, wedges, or clamps – just a hammer. No special tools required.

Q: How are panels packed for shipping?

A: Panels are packed flat in steel pallets or frames. A standard 40-foot container holds approximately 150-200 square metres of 117 series panels.

Q: Can the plywood face be replaced on site?

A: Yes. Replacement faces can be installed on site. Remove the old plywood, clean the frame, and attach the new face with screws or rivets. Pre-cut replacement faces are also available.

 

Hot Tags: 117 steel frame formwork, China 117 steel frame formwork manufacturers, suppliers factory, 100 Steel Frame Formwork, 117 Steel Frame Formwork, 120 Steel Frame Formwork, 63 Steel Frame Formwork, 64 Steel Frame Formwork, steel frame formwork

Send Inquiry