100 Steel Frame Formwork

100 Steel Frame Formwork
Product Introduction:
100 steel frame formwork is a heavy-duty modular system for walls, columns, slabs, beams, and large structural elements. The “100” refers to the steel frame height – 100mm – which gives you substantially more stiffness and load capacity than standard 63mm or 64mm systems.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 100 steel frame formwork in China. If you're going to wholesale bulk classy 100 steel frame formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

100 Steel Frame Formwork 1001

100 steel frame formwork is a heavy-duty modular system for walls, columns, slabs, beams, and large structural elements. The "100" refers to the steel frame height – 100mm – which gives you substantially more stiffness and load capacity than standard 63mm or 64mm systems.

The system uses welded steel frames with a 100mm profile depth, made from Q235 or Q355B steel. Panel faces are 15-18mm film-faced plywood. The deeper frame allows larger panel sizes and handles higher concrete pressures without flexing.

100 series is the heavy-duty option in the steel frame family – designed for big civil projects, high concrete pressures, and jobs where standard systems are not enough. It sits above 63 and 64 series in capacity, strength, and durability.

 

Advantages

 

More load capacity. 100mm frame depth gives you much more stiffness than 63mm or 64mm systems. You can pour taller walls, use faster placement rates, and handle higher concrete pressures – typically 80-90 kN/m².

Larger panels. Deeper frame allows bigger panels – up to 900mm wide. Fewer panels per square metre means less assembly time, fewer joints, and better concrete finish.

Lasts longer. Heavier steel section means less wear. The frame itself can last 8-10 years with proper care. Less deflection under load means panels stay flat and true longer.

Better concrete finish. More stiffness means less deflection between tie rods. The plywood face stays flat – you get a smoother, more even concrete surface.

Versatile. Works for walls, columns, slabs, beams, bridge piers, and large civil structures. Handles both standard and custom configurations.

Repairable. Like other steel frame systems, the face is replaceable. When the plywood wears out, replace just the face – the steel frame stays.

100 Steel Frame Formwork 2001

 

Features

Frame height 100mm
Frame material Q235 or Q355B steel
Frame section Hollow or solid profile
Panel face 15-18mm film-faced plywood
Panel thickness 100mm (frame) + plywood
Panel weight approx. 55-65kg/m²
Panel widths 100–900mm
Panel heights 300–3000mm (300mm increments)
Lateral load capacity 80-90 kN/m²
Frame service life 8-10 years
Panel reuse 50-80 times typical
Connection Pins and wedges, or clamps
Finish Painted or hot-dip galvanised

 

Specifications

 

Parameter

Specification

Frame Height

100mm

Frame Material

Q235 / Q355B steel

Frame Section

Hollow or solid

Panel Face

15-18mm film-faced plywood

Panel Weight

~55-65kg/m²

Width Range

100–900mm

Height Range

300–3000mm

Lateral Load

80-90 kN/m²

Frame Service Life

8-10 years

Panel Reuse

50-80 times

Connection

Pins/wedges or clamps

Finish

Painted / Galvanised

 

Application Scope

 

100 Steel Frame Formwork 3001

100 steel frame formwork is built for heavy-duty concrete work:

► Walls – high-rise residential, commercial, industrial shear walls

► Columns – large square and rectangular columns

► Slabs – floor and roof slabs, heavy-duty industrial slabs

► Beams – large beams and girders

► Bridge piers and abutments

► Tunnels and underground structures

► Power plants, cooling towers, dams

► Large civil infrastructure projects

The system is best for projects where standard 63mm or 64mm systems are not strong enough – taller pours, higher concrete pressures, larger structural elements, or demanding tolerance requirements.

 

System Components

A complete 100 steel frame formwork system includes:

Panels:

► Standard wall panels – various widths and heights

► Column panels – adjustable for different column sizes

► Corner sections – internal and external

► Filler panels – for infill and adjustment

Connections:

► Pins and wedges – panel-to-panel connections

► Clamps – alternative connection

► Flat ties – panel tensioning

100 Steel Frame Formwork 4001
100 Steel Frame Formwork 8

Reinforcement:

► Tie rods and nuts – through-wall tensioning

► Heavy-duty walers – horizontal bracing

► Corner braces – stability at corners

Supports:

► Adjustable steel props – vertical support

► Base jacks – levelling

► Pull-push props – plumb adjustment

 

Competitive Advantages

 

1

Strength. 100mm frame gives you 80-90 kN/m² load capacity – much more than 63mm or 64mm systems. You can pour taller walls and handle faster placement rates without worrying about deflection.

2

Durability. Heavier steel section means frames last longer – 8-10 years or more. Less maintenance, fewer replacements.

3

Fewer panels. Deeper frame allows larger panels – up to 900mm wide. Fewer panels per square metre means faster assembly, fewer joints, less potential for leakage.

4

Better finish. Extra stiffness means the panel face stays flat under load. You get a smoother, more even concrete surface.

5

Cost per use. With 50-80 uses and 8-10 year frame life, the per-use cost is competitive – especially on large projects where the capacity is needed.

6

Proven design. Similar heavy-duty systems have been used for decades on large civil projects – mature, reliable.

7

Flexible. Works across a wide range of applications – from standard walls to bridge piers to power plant structures.

 

Services

 

Design consultation

free layout planning and panel configuration from your drawings

01

Custom fabrication

non-standard sizes and special configurations – available on request

02

Technical support

video consultation within 24 hours; on-site for complex projects

03

Delivery

standard panels in 20-30 working days; custom orders 25-35 working days

04

Samples

available for testing – freight to be covered by buyer

05

 

FAQ

 

Q: What does "100" mean in 100 steel frame formwork?

A: The "100" refers to the steel frame height – 100mm. This is the deep-profile option in the steel frame family, offering significantly more stiffness and load capacity than standard 63mm or 64mm systems.

Q: How much load can 100 steel frame formwork handle?

A: Typically 80-90 kN/m², depending on panel configuration and tie rod spacing. For comparison, 63mm systems handle 30-60 kN/m².

Q: What projects is 100 steel frame formwork best for?

A: Large civil projects – bridge piers, power plants, dams, high-rise buildings with heavy structural elements, and any project where standard 63mm or 64mm systems are not strong enough.

Q: Can I use it for walls and columns?

A: Yes. The system works for walls, columns, slabs, beams, bridge piers, and tunnels.

Q: How many times can 100 steel frame formwork be reused?

A: 50-80 times with normal site care. The steel frame itself can last 8-10 years. The plywood face can be replaced when it wears out.

Q: Is it heavier than 63mm systems?

A: Yes – about 55-65kg/m² compared to 30-50kg/m² for 63mm systems. The extra weight is the trade-off for higher load capacity and larger panels.

Q: What sizes do the panels come in?

A: Standard widths from 100mm to 900mm. Heights from 300mm to 3000mm in 300mm increments. Custom sizes available.

Q: How do I connect the panels?

A: Pins and wedges, or clamp systems – both options available.

Q: Can I get custom panel sizes?

A: Yes – non-standard sizes and special configurations available on request.

Q: What is the concrete finish quality like?

A: The 100mm frame stiffness means less deflection between tie rods – the plywood face stays flat, giving you a smoother, more even concrete surface. Often good for bare concrete finishes.

Q: How does 100 steel frame formwork compare to aluminium?

A: Steel frame is heavier than aluminium (55-65kg/m² vs 22-25kg/m²) but costs significantly less – roughly half the price. Steel frame also handles higher loads. Aluminium is better where weight and handling speed are critical; steel frame is better where cost and load capacity are the priority.

Q: Do I need special tools to assemble 100 steel frame formwork?

A: No. Assembly uses standard pins, wedges, or clamps – just a hammer. No special tools required.

Q: How are panels packed for shipping?

A: Panels are packed flat in steel pallets or frames. A standard 40-foot container holds about 150-200 square metres of 100 series panels.

Q: Can the plywood face be replaced on site?

A: Yes. Replacement faces can be installed on site. Remove the old plywood, clean the frame, and attach the new face with screws or rivets. We also offer replacement faces pre-cut to size.

 

Hot Tags: 100 steel frame formwork, China 100 steel frame formwork manufacturers, suppliers factory, 100 Steel Frame Formwork, 117 Steel Frame Formwork, 120 Steel Frame Formwork, 63 Steel Frame Formwork, 64 Steel Frame Formwork, steel frame formwork

Send Inquiry