Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of wpc solid plastic formwork in China. If you're going to wholesale bulk classy wpc solid plastic formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.
Introduction
WPC solid plastic formwork is a concrete forming system made from wood‑plastic composite – a material produced by combining wood fibre with thermoplastics under heat and pressure. The result is a solid panel that gives you the workability of timber and the durability of plastic.
Unlike hollow‑core plastic panels, solid WPC panels offer uniform density across the entire surface, so load‑bearing performance stays consistent. Standard sheet sizes are 1,220mm × 2,440mm or 915mm × 1,830mm, with thickness options from 10mm to 20mm. Typical density falls between 0.7 and 0.75 g/cm³.
This product works as a replacement for plywood, steel, or bamboo formwork. With proper site handling, panels typically deliver 30‑50 uses – sometimes more – which reduces replacement frequency and drives down project costs.
Advantages
Concrete surface quality. The smooth, non‑porous face produces a clean, glossy concrete finish after stripping. The surface resists concrete adhesion, so you can skip release agent on most jobs. Field measurements show flatness within 2mm per metre. The material also stands up to diluted acids, alkalis, and standard release agents.
Weight and handling. WPC panels are noticeably lighter than steel, which cuts manual handling effort and freight costs. You can cut, saw, drill, and nail them with ordinary woodworking tools. One person can manage most panel sizes without mechanical help.
Cleaning and upkeep. The surface is formulated to shed concrete. After each use, panels clean up with water or steam – no release oil, no chemical cleaners, no extra material cost.
Weather and moisture resistance. WPC does not absorb water. The panels are waterproof, moisture‑proof, and corrosion‑resistant. They won't swell, warp, or rot when exposed to rain or humidity. Working temperature range is -20°C to +100°C.
Cost per use. With 30‑50 reuse cycles, the per‑use cost is well below plywood, which typically gives you only 3‑5 uses. Field data shows savings up to 38% compared to bamboo plywood. Over a full project, that difference adds up.
Fire performance. The material is self‑extinguishing and produces very little smoke when exposed to fire.
Environmental footprint. WPC is made from recycled wood fibre and plastic waste. At end of life, the panels are fully recyclable. This supports green building certification and reduces deforestation and carbon emissions.
On‑site modification. Panels can be cut, drilled, nailed, and screwed using standard woodworking tools. They work with timber, steel, and aluminium framing. No specialised equipment is required for site adjustments.

Features
| Material | Wood‑plastic composite – wood fibre + thermoplastics (PVC or PP) |
| Construction | Solid (non‑hollow) |
| Density | 0.7 – 0.75 g/cm³ |
| Standard sizes | 1,220mm × 2,440mm; 915mm × 1,830mm |
| Thickness options | 10mm, 12mm, 15mm, 18mm, 20mm |
| Surface | Smooth, non‑porous, non‑stick |
| Typical reuse cycles | 30‑50+ |
| Operating temperature | -20°C to +100°C |
| Water absorption | Negligible |
| Fire rating | Self‑extinguishing, low smoke |
| Chemical resistance | Diluted acids, alkalis, release agents |
| Workability | Standard woodworking tools – sawing, drilling, nailing, screwing, cutting |
| Recyclability | 100% |
Specifications
WPC Solid Plastic Formwork Common Sizes
|
Parameter |
Common Specification |
|
Common Length |
1830 / 2440 / 2500 mm |
|
Common Width |
915 / 1220 mm |
|
Most Common Size |
1220 × 2440 mm |
|
Common Thickness |
12 / 15 / 18 mm |
|
Other Available Thickness |
20 / 21 mm |
|
Common Standard Size |
915 × 1830 mm |
|
Common Export Size |
1220 × 2440 × 18 mm |
Application Scope

WPC solid plastic formwork handles most cast‑in‑place concrete jobs:
► Wall formwork – residential, commercial, industrial shear walls
► Column formwork – square and rectangular columns
► Slab and deck formwork – floors, roofs, bridge decks
► Beam formwork – various depths and widths
► Basement and underground – waterproof, corrosion‑resistant
► Infrastructure – tunnels, culverts, canals
► Residential and commercial buildings – apartments, villas, offices
► Water‑retaining structures – reservoirs, tanks, treatment plants
The system performs best on projects where concrete finish quality is important and where multiple uses justify the investment. Light weight and easy cutting also make it a practical choice for sites with limited crane access or where on‑site adjustments are routine.
System Components
A complete WPC solid plastic formwork system includes:
Panels:
► Standard solid panels – various thicknesses and sizes
► Corner sections – internal and external
► Custom‑cut panels – supplied to specification
Connection hardware:
► Pins and wedges – for panel‑to‑panel joints
► Clamps and brackets – for securing panels to supports
► Nails and screws – standard fasteners work
Reinforcement:
► Steel or aluminium walers – horizontal bracing for large walls
► Timber or steel beams – secondary support members
Support equipment:
► Adjustable steel props – vertical support
► Base jacks – levelling on uneven ground
► Pull‑push props – plumb adjustment and stabilisation
Additional components available for custom configurations.
Competitive Advantages
Material cost. WPC is priced below aluminium and steel systems. With 30‑50 reuse cycles, the cost per use beats plywood and bamboo plywood options.
Concrete finish. The panel surface delivers flatness within 2mm per metre – often achieving bare concrete quality that eliminates plastering. Saves material and labour.
Site flexibility. Unlike steel or aluminium, WPC panels can be cut and drilled with ordinary woodworking tools. Quick on‑site adjustments without special equipment.
Production. We manufacture these panels in‑house under controlled conditions. Consistent quality from batch to batch.
Quality control. Every panel is checked for dimensional accuracy, surface condition, and structural integrity before dispatch.
Sustainability. Made from recycled wood fibre and thermoplastics. Fully recyclable at end of life. Supports green building certification and reduces deforestation.
Export documentation. We provide complete export documentation – material test reports, inspection certificates, customs clearance – for smooth international delivery.
Services
Design consultation
free layout planning and panel configuration from your drawings
01
Custom fabrication
non‑standard sizes, thicknesses, and configurations available on request
02
Technical support
video consultation within 24 hours; on‑site support for complex projects
03
Delivery
standard panels in 5‑10 working days; custom orders in 15‑20 working days
04
Samples
available for testing – freight to be covered by buyer
05
FAQ
Q: How many uses can I get from WPC panels?
A: 30‑50 uses with normal site handling and cleaning. Careful use can push that number higher. That reuse rate is what makes WPC formwork more economical than plywood over a full project.
Q: Do I need release agent?
A: Usually not. The non‑porous surface prevents concrete from sticking. Water or steam cleaning after stripping is enough. For high‑spec finishes, you can still use a light release coat, but it's not required.
Q: Can I cut and drill these panels on site?
A: Yes. Standard woodworking tools work – saws, drills, nail guns. The material is compatible with timber, steel, and aluminium framing.
Q: What temperature range can they handle?
A: -20°C to +100°C. That covers hot climates and freezing weather – most site conditions you will encounter.
Q: Are they waterproof?
A: Yes. The material does not absorb moisture. 100% waterproof. Suitable for underground and damp‑site work.
Q: Are they fire-resistant?
A: Yes. Self‑extinguishing with minimal smoke output.
Q: What concrete finish quality can I expect?
A: Smooth and glossy. Flatness within 2mm per metre – often good enough for bare concrete, no plastering needed.
Q: Are they environmentally sustainable?
A: Yes. Made from recycled materials. Fully recyclable at end of life.
Q: Can I order samples?
A: Yes – samples available for testing. Freight to be covered by buyer. Each sample marked with panel specifications.
Hot Tags: wpc solid plastic formwork, China wpc solid plastic formwork manufacturers, suppliers factory, 65 PP Plastic Formwork, 75 ABS Plastic Formwork, 78 ABS Plastic Formwork, 78 PP Plastic Formwork, PP Hollow Plastic Formwork, WPC Solid Plastic Formwork

