Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 75 abs plastic formwork in China. If you're going to wholesale bulk classy 75 abs plastic formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.
Introduction
75 ABS plastic formwork is a concrete forming system made from high-performance ABS (Acrylonitrile Butadiene Styrene) thermoplastic. The 75 refers to panel thickness – 75mm – which gives the panels enough stiffness for walls, columns, slabs, and beams.
The system includes standard panels, corner sections, connecting handles, steel walers, tie rods, and adjustable props. Panels are injection-moulded, so they come out with consistent dimensions and a smooth surface. The material itself is tough – good impact resistance, wear resistance, and corrosion resistance.
Advantages
Strong and durable. ABS has good mechanical strength, impact resistance, and wear resistance. It holds up well across a wide temperature range, so it works in demanding site conditions.
Lightweight. No crane needed for handling. One person can carry and position each panel. That saves equipment costs and speeds up labour.
Good concrete finish. The panel surface is smooth and defect-free. Concrete comes out clean, with minimal surface issues. The non-porous surface means concrete does not stick. In most cases, you can skip plastering.
No release agent needed. The surface is treated to resist concrete adhesion. After stripping, you clean the panels with water – no release oil, no chemicals, no extra cost.
Weatherproof. ABS does not absorb moisture. The panels are waterproof and stable in wet conditions. They work in underground and damp environments where timber would rot and steel would rust.
High reuse value. 100 to 150 times uses is typical – compared to plywood, which gives you 3-5 uses. Over the life of a project, the cost advantage is significant.
Recyclable. At end of life, the material is 100% recyclable. Waste from production and scrap panels can be recycled.

Features
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Panel thickness | 75mm |
| Density | 1.03 – 1.28 g/cm³ |
| Surface | Smooth, non-stick, non-porous |
| Reuse cycles | 100 to 150 times (typical) |
| Temperature range | -30°C to +70°C |
| Maximum load | 60 kN/m² |
| Maximum slab thickness | 350mm |
| Water absorption | None |
| Colour | Black |
| Compatible with | Steel walers, tie rods, support props, scaffold systems |
Specifications
|
Adjustable size range(mm) |
|||||||||
|
600*600 |
|||||||||
|
550*600 |
550*550 |
||||||||
|
500*600 |
500*550 |
500*500 |
|||||||
|
450*600 |
450*550 |
450*500 |
450*450 |
||||||
|
400*600 |
400*550 |
400*500 |
400*450 |
400*450 |
|||||
|
350*600 |
350*550 |
350*500 |
350*450 |
350*400 |
350*350 |
||||
|
300*600 |
300*550 |
300*500 |
300*450 |
300*400 |
300*350 |
300*300 |
|||
|
250*600 |
250*550 |
250*500 |
250*450 |
250*400 |
250*350 |
250*300 |
250*250 |
||
|
200*600 |
200*550 |
200*500 |
200*450 |
200*400 |
200*350 |
200*300 |
200*250 |
200*200 |
|
|
150*600 |
150*550 |
150*500 |
150*450 |
150*400 |
150*350 |
150*300 |
150*250 |
150*200 |
150*150 |
Custom sizes available on request.
Application Scope

75 ABS plastic formwork works for most cast-in-place concrete work. Typical applications include:
► Walls – residential, commercial, and industrial shear walls
► Columns – square and rectangular sections
► Slabs and decks – floor slabs, roof slabs, bridge decks (up to 350mm thick)
► Beams – various depths and widths, 50mm increments
► Basements and underground structures – waterproof and rust-free, suitable for wet conditions
► Infrastructure – tunnels, culverts, canals
► Residential and commercial buildings – apartments, villas, offices, shopping centres
The system works well on projects with repetitive layouts – the more uses you get from the panels, the better the economics. Its light weight also makes it a good choice for sites where crane access is limited.
System Components
A complete system includes:
Panels:
► Standard 75mm panels – 1,200mm × 600mm, injection-moulded ABS
► Corner sections – internal and external
► Small panels – various sizes for infill and adjustment
Reinforcement:
► Steel walers – horizontal bracing for large walls
► Tie rods – threaded rods for tensioning
► Plate nuts – secure tie rods
Connections:
► Universal handles – easy assembly, even for unskilled workers
► Connecting pins – panel-to-panel and panel-to-corner
Supports:
► Adjustable steel props – vertical support
► Base jacks – levelling
► Pull-push props – alignment and stabilisation
Optional items available for custom setups.
Competitive Advantages
Cost
Material cost is substantially lower than aluminium. With 100 to 150 times uses, the per-use cost is much lower than plywood (3-5 uses) or steel. For projects with repetitive floors, the savings are significant.
Manufacturing
We produce these panels in our own facility using injection moulding. Quality stays consistent from batch to batch. ABS gives you good mechanical strength and dimensional accuracy.
Quality
Each panel is checked for dimensional accuracy, surface quality, and structural integrity before it leaves the factory. The smooth, non-porous surface gives you good concrete finish and easy cleaning.
Design
75mm thickness gives you the stiffness you need for walls, columns, and slabs, but the panels are still light enough for one person to handle. The modular design with universal handles means even inexperienced workers can assemble the system quickly.
Environmental
ABS is 100% recyclable. Scrap panels can be recycled. The product supports green building standards and reduces waste.
Export
We handle all export documentation – material test reports, inspection certificates, customs paperwork. No surprises at the port.
Services

► Design consultation: free layout and panel configuration from your drawings
► Custom fabrication: non-standard sizes and special configurations – available on request
► Technical support: video consultation within 24 hours; on-site for large or complex projects
► Delivery: standard panels in 5-10 working days (subject to stock); custom orders in 15-20 working days
► Samples: available for testing – freight to be covered by the buyer
FAQ
Q: How many uses can I expect from these panels?
A: With normal handling and cleaning, 80-100 uses is typical. Some clients report 100-300 with careful use. That is the main reason ABS plastic formwork works out cheaper than timber over the life of a project.
Q: Do I need release agent?
A: No. The non-porous surface is treated to stop concrete sticking. You clean it with water after each use – no oil, no chemicals.
Q: Can I cut or drill the panels on site?
A: Yes. Standard tools work fine – saws, drills, nail guns. You can also screw into them. They work alongside wood, steel, and aluminium.
Q: What temperatures can they handle?
A: -30°C to +70°C in use. ABS has good thermal stability for most construction conditions.
Q: Are they waterproof?
A: Yes. They are 100% waterproof and do not absorb moisture. They work in underground and wet conditions where timber rots and steel rusts.
Q: How do I clean them?
A: Water. The non-porous surface means concrete does not stick, so cleaning is quick and easy. No special cleaners needed.
Q: What is the load capacity?
A: 60 kN/m² safe working load. Maximum slab thickness is 350mm with proper shoring.
Q: Can I get samples?
A: Yes – samples for testing. Freight to be covered by the buyer. Each sample is marked with the panel specifications.
Hot Tags: 75 abs plastic formwork, China 75 abs plastic formwork manufacturers, suppliers factory, 65 PP Plastic Formwork, 75 ABS Plastic Formwork, 78 ABS Plastic Formwork, 78 PP Plastic Formwork, plastic formwork, PP Hollow Plastic Formwork
