78 PP Plastic Formwork

78 PP Plastic Formwork
Product Introduction:
78 PP plastic formwork is a concrete forming system made from polypropylene. The number 78 refers to the panel thickness in millimetres – enough stiffness to handle concrete pressure without excessive bending.
Send Inquiry
Description
Technical Parameters

Worksun Group Co., Ltd. is one of the most reliable manufacturers and suppliers of 78 pp plastic formwork in China. If you're going to wholesale bulk classy 78 pp plastic formwork, welcome to get pricelist from our factory. All customized products are with high quality and low price.

 

Introduction

 

78 PP Plastic Formwork 1001

78 PP plastic formwork is a concrete forming system made from polypropylene. The number 78 refers to the panel thickness in millimetres – enough stiffness to handle concrete pressure without excessive bending.

The system includes standard panels, corner sections, connecting handles, steel walers, tie rods, and adjustable props. Panels are produced through moulding, giving consistent dimensions and a smooth surface. Polypropylene offers heat resistance, corrosion resistance, and impact strength.

one person can lift and position it without help. The modular design means even inexperienced crews can assemble the system. With normal care, these panels deliver 80-100 uses, sometimes more, which keeps the per-use cost low.

 

Advantages

 

Strength and durability. Polypropylene has good impact strength and wear resistance. It holds up across a wide temperature range and resists chemicals, ageing, and weather.

one person can carry it. No crane needed for normal handling. That saves equipment time and labour.

Clean concrete finish. The smooth, non-porous surface gives clean concrete with few surface defects. The material does not absorb water, so concrete does not stick. In most cases, plastering is not needed.

No release oil required. The surface is treated to resist concrete adhesion. After stripping, panels are cleaned with water – no oil, no chemicals, no extra cost.

Weatherproof. Polypropylene does not absorb moisture. The panels are waterproof and stable in wet conditions. They work in underground and damp environments where timber rots and steel rusts.

High reuse value. 80-100 uses is typical – far more than plywood, which gives only 3-5 uses. Over the life of a project, the cost advantage is significant.

Recyclable. At end of life, the material is 100% recyclable. The production process generates zero emissions.

78 PP Plastic Formwork 3001

 

Features

Material Polypropylene (PP)
Panel thickness 78mm
Melting point 167°C
Vicat softening point 150°C
Surface Smooth, non-porous, non-stick
Reuse cycles 80-100+ (typical)
Load capacity 60 kN/m²
Maximum slab thickness up to 250mm
Water absorption ≤0.03%
Chemical resistance Acid, alkali, corrosion resistant
Colour Black or grey
Compatibility Steel walers, tie rods, props, scaffold systems

 

Specifications

 

Size mm

Unit Weigh kg/pcs

Area m²/pcs

1500*1200*78

27.00

1.8000

1500*1000*78

22.50

1.5000

1500*900*78

20.25

1.3500

1500*800*78

18.00

1.2000

1500*700*78

15.75

1.0500

1500*600*78

13.50

0.9000

1500*500*78

11.25

0.7500

1500*450*78

10.13

0.6750

1500*400*78

9.00

0.6000

1500*350*78

7.88

0.5250

750*150*78

2.25

0.1125

750*100*78

1.50

0.0750

600*600*78

6.84

0.3600

600*500*78

5.70

0.3000

500*500*78

4.75

0.2500

500*400*78

3.80

0.2000

400*400*78

3.04

0.1600

300*300*78

1.71

0.0900

250*250*78

1.19

0.0625

200*200*78

0.76

0.0400

150*150*78

0.43

0.0225

Custom sizes available on request.

 

Application Scope

 

78 PP Plastic Formwork 7001

This system handles most cast-in-place concrete work:

► Walls – residential, commercial, and industrial shear walls

► Columns – square, rectangular, and circular sections

► Slabs and decks – floor slabs, roof slabs, bridge decks

► Beams – various depths and widths

► Basements and underground structures – waterproof, rust-free, suitable for wet conditions

► Infrastructure – tunnels, culverts, canals, bridges

► Residential and commercial buildings – apartments, villas, offices, shopping centres, foundations, lift shafts

The system works best on projects with repetitive layouts – more panel uses mean better economics. Lightweight construction also suits sites with limited crane access.

 

System Components

A complete system includes:

Panels:

► Standard 78mm panels – 1,200mm × 600mm, moulded PP

► Corner sections – internal and external

► Small panels – various sizes for infill and adjustment

Reinforcement:

► Steel walers – horizontal bracing for large walls

► Tie rods – threaded rods for tensioning

► Plate nuts – secure tie rods

Connections:

► Universal handles – easy assembly, even for unskilled workers

► Connecting pins – panel-to-panel and panel-to-corner

Supports:

► Adjustable steel props – vertical support

► Base jacks – levelling

► Pull-push props – alignment and stabilisation

Optional items available for custom setups.

 

Competitive Advantages

 

1

Cost. PP material costs substantially less than aluminium. With 80-100 uses, the per-use cost is much lower than plywood (3-5 uses) or steel. For projects with repetitive floors, the savings add up.

2

Heat and chemical resistance. PP melts at 167°C and softens at 150°C, so it handles hot climates and concrete curing heat without problems. It resists acid, alkali, and corrosion.

3

Manufacturing. We produce these panels in our own facility using controlled moulding processes. Quality stays consistent from batch to batch.

4

Quality. Every panel is checked for dimensional accuracy, surface quality, and structural integrity before dispatch. The smooth, non-porous surface gives good concrete finish and easy cleaning.

5

Design. 78mm thickness gives you the stiffness you need, but the panels are still light enough for one person to handle. Universal handles mean even inexperienced workers can assemble the system quickly.

6

Environmental. PP is 100% recyclable. Production generates zero emissions. The product supports green building standards.

7

Export. We handle all export documentation – material test reports, inspection certificates, customs paperwork. No surprises at the port.

 

Services

 

78 PP Plastic Formwork 31

► Design consultation: free layout and panel configuration from your drawings

► Custom fabrication: non-standard sizes and special configurations – available on request

► Technical support: video consultation within 24 hours; on-site for large or complex projects

► Delivery: standard panels in 5-10 working days (subject to stock); custom orders in 15-20 working days

► Samples: available for testing – freight to be covered by the buyer

 

FAQ

 

Q: How many uses can I expect from these panels?

A: With normal handling and cleaning, 80-100 uses is typical. Some clients report higher numbers with careful use. That is why PP plastic formwork works out cheaper than timber over the life of a project.

Q: Do I need release agent?

A: No. The non-porous surface is treated to stop concrete sticking. Clean with water after each use – no oil, no chemicals.

Q: Can I cut or drill the panels on site?

A: Yes. Standard tools work fine – saws, drills, nail guns. You can also screw into them. They work alongside wood, steel, and aluminium.

Q: What temperatures can they handle?

A: Use up to 90°C. The material melts at 167°C and softens at 150°C – well above normal construction conditions.

Q: Are they waterproof?

A: Yes. 100% waterproof. They do not absorb moisture – absorption is below 0.03%. Rain and humidity do not affect them.

Q: How do I clean them?

A: Water. A pressure washer works well. No special cleaners needed.

Q: What is the load capacity?

A: 60 kN/m² safe working load. Maximum slab thickness is 250mm with proper shoring.

Q: Can I get samples?

A: Yes – samples for testing. Freight to be covered by the buyer. Each sample is marked with the panel specifications.

 

Hot Tags: 78 pp plastic formwork, China 78 pp plastic formwork manufacturers, suppliers factory, 65 PP Plastic Formwork, 75 ABS Plastic Formwork, 78 PP Plastic Formwork, plastic formwork, PP Hollow Plastic Formwork, WPC Solid Plastic Formwork

Send Inquiry